Torque measures force applied during rotation: τ = rF.  Torque (τ, the Greek letter tau) = the radius of the lever arm (r) multiplied by the force (F) applied. Radius is measured from the center of rotation or fulcrum to the point at which the perpendicular force is being applied. The resulting unit for torque is newton-meter (N-m) or foot-pound (ft-lb).

To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

R_ad_a = R_bd_b

Solving for d_b, our missing value, and plugging in our variables yields:

d_b = \( \frac{R_ad_a}{R_b} \) = \( \frac{35 lbs. \times 5 ft.}{15 lbs.} \) = \( \frac{175 ft⋅lb}{15 lbs.} \) = 11.67 ft.

Work is force multiplied by distance. Because both Connie and Sam moved the same weight the same distance they have done an equal amount of work. Sam employed the mechnacial advantage of an inclined plane so he exerted less effort to do the work but the amount of work done was still the same.

Newton's Second Law of Motion states that "The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object." This Law describes the linear relationship between mass and acceleration when it comes to force and leads to the formula F = ma or force equals mass multiplied by rate of acceleration.

As an object falls, its potential energy is converted into kinetic energy. The principle of conservation of mechanical energy states that, as long as no other forces are applied, total mechanical energy (PE + KE) of the object will remain constant at all points in its descent.