| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.39 |
| Score | 0% | 68% |
Which class of lever is used to increase force on an object in the same direction as the force is applied?
third |
|
second |
|
first |
|
all of these |
A second-class lever is used to increase force on an object in the same direction as the force is applied. This lever requires a smaller force to lift a larger load but the force must be applied over a greater distance. The fulcrum is placed at one end of the lever and mechanical advantage increases as the object being lifted is moved closer to the fulcrum or the length of the lever is increased. An example of a second-class lever is a wheelbarrow.
The work done by the sum of all forces acting on a particle equals the change in the kinetic energy of the particle. This defines which of the following?
Pascal's law |
|
conservation of mechanical energy |
|
mechanical advantage |
|
work-energy theorem |
The work-energy theorem states that the work done by the sum of all forces acting on a particle equals the change in the kinetic energy of the particle. Simply put, work imparts kinetic energy to the matter upon which the work is being done.
Friction resists movement in a direction __________ to the movement.
parallel |
|
perpendicular |
|
opposite |
|
normal |
Friction resists movement. Kinetic (also called sliding or dynamic) friction resists movement in a direction opposite to the movement. Because it opposes movement, kinetic friction will eventually bring an object to a stop. An example is a rock that's sliding across ice.
On Earth, acceleration due to gravity (g) is approximately __________.
1 m/s |
|
1 m/s2 |
|
6.67 x 10-11 m/s2 |
|
9.8 m/s2 |
Newton's Law of Univeral Gravitation defines the general formula for the attraction of gravity between two objects: \(\vec{F_{g}} = { Gm_{1}m_{2} \over r^2}\) . In the specific case of an object falling toward Earth, the acceleration due to gravity (g) is approximately 9.8 m/s2.
| 2.75 ft. | |
| 8.25 ft. | |
| 0 ft. | |
| 33 ft. |
To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:
Rada = Rbdb
where a represents the left side of the fulcrum and b the right, R is resistance (weight) and d is the distance from the fulcrum.Solving for da, our missing value, and plugging in our variables yields:
da = \( \frac{R_bd_b}{R_a} \) = \( \frac{55 lbs. \times 3 ft.}{20 lbs.} \) = \( \frac{165 ft⋅lb}{20 lbs.} \) = 8.25 ft.