ASVAB Mechanical Comprehension Practice Test 440418 Results

Your Results Global Average
Questions 5 5
Correct 0 3.06
Score 0% 61%

Review

1 If 55 lbs. of force is applied 6 ft. from the fulcrum at the blue arrow and the green box is 5 ft. from the fulcrum, how much would the green box have to weigh to balance the lever?
62% Answer Correctly
16.5 lbs.
198 lbs.
66 lbs.
264 lbs.

Solution

To balance this lever the torques at the green box and the blue arrow must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

Rada = Rbdb

where a represents the green box and b the blue arrow, R is resistance (weight/force) and d is the distance from the fulcrum.

Solving for Ra, our missing value, and plugging in our variables yields:

Ra = \( \frac{R_bd_b}{d_a} \) = \( \frac{55 lbs. \times 6 ft.}{5 ft.} \) = \( \frac{330 ft⋅lb}{5 ft.} \) = 66 lbs.


2

A shovel is an example of which class of lever?

56% Answer Correctly

second

third

first

a shovel is not a lever


Solution

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.


3 If the radius of the axle is 7 and the radius of the wheel is 10, what is the mechanical advantage of this wheel and axle configuration?
36% Answer Correctly
1
3
0
1

Solution

The mechanical advantage of a wheel and axle lies in the difference in radius between the inner (axle) wheel and the outer wheel. But, this mechanical advantage is only realized when the input effort and load are applied to different wheels. Applying both input effort and load to the same wheel results in a mechanical advantage of 1.


4

The force exerted on an object due to gravity is called:

69% Answer Correctly

weight

mass

potential energy

density


Solution

Mass is an intrinsic property of matter and does not vary. Weight is the force exerted on the mass of an object due to gravity and a specific case of Newton's Second Law of Motion. Replace force with weight and acceleration with acceleration due to gravity on Earth (g) and the result is the formula for weight: W = mg or, substituting for g, weight equals mass multiplied by 9.8 m/s2.


5

A block and tackle with four pulleys would have a mechanical advantage of:

79% Answer Correctly

4

2

1

0


Solution

Two or more pulleys used together constitute a block and tackle which, unlike a fixed pulley, does impart mechanical advantage as a function of the number of pulleys that make up the arrangement.  So, for example, a block and tackle with three pulleys would have a mechanical advantage of three.