ASVAB Mechanical Comprehension Practice Test 440745 Results

Your Results Global Average
Questions 5 5
Correct 0 3.09
Score 0% 62%

Review

1

What type of load doesn't create specific stress points or vary with time?

59% Answer Correctly

static uniformly distributed load

non-uniformly distributed load

impact load

concentrated load


Solution

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.


2 A mass of air has a pressure of 9.0 psi and a volume of 45 ft.3. If the air is compressed to a new volume of 25 ft.3, what is the new pressure?
56% Answer Correctly
16.2 psi
32.4 psi
18.2 psi
9.2 psi

Solution

According to Boyle's Law, pressure and volume are inversely proportional:

\( \frac{P_1}{P_2} \) = \( \frac{V_2}{V_1} \)

In this problem, V2 = 25 ft.3, V1 = 45 ft.3 and P1 = 9.0 psi. Solving for P2:

P2 = \( \frac{P_1}{\frac{V_2}{V_1}} \) = \( \frac{9.0 psi}{\frac{25 ft.^3}{45 ft.^3}} \) = 16.2 psi


3

Which of these will have the most impact on the kinetic energy of an object?

54% Answer Correctly

its mass

its weight

its direction

its speed


Solution

Kinetic energy is the energy of movement and is a function of the mass of an object and its speed: \(KE = {1 \over 2}mv^2\) where m is mass in kilograms, v is speed in meters per second, and KE is in joules. The most impactful quantity to kinetic energy is velocity as an increase in mass increases KE linearly while an increase in speed increases KE exponentially.


4

Sam can do 50 ft. lb. of work in 2 minutes and 5 seconds. What would Sam have to do to increase his power output?

63% Answer Correctly

do 25 ft. lb. of work in 2 minutes 5 seconds

do the work in 2 minutes

do 100 ft. lb. of work in 4 minutes 12 seconds

do the work in 3 minutes


Solution

Power is the rate of doing work or \(\frac{W}{t}\). To increase power, increase the work being done in the same amount of time or do the same amount of work in less time.


5

Drag is a type of:

81% Answer Correctly

friction

kinetic energy

potential energy

work


Solution

Drag is friction that opposes movement through a fluid like liquid or air. The amount of drag depends on the shape and speed of the object with slower objects experiencing less drag than faster objects and more aerodynamic objects experiencing less drag than those with a large leading surface area.