ASVAB Mechanical Comprehension Practice Test 446192 Results

Your Results Global Average
Questions 5 5
Correct 0 3.25
Score 0% 65%

Review

1

Boyle's law defines the relationship between pressure and volume as:

57% Answer Correctly

\(\frac{P_1}{P_2} = {V_1}{V_2}\)

\({P_1}{P_2} = {V_1}{V_2}\)

\(\frac{P_1}{P_2} = \frac{V_2}{V_1}\)

\(\frac{P_1}{P_2} = \frac{V_1}{V_2}\)


Solution

Boyle's law states that "for a fixed amount of an ideal gas kept at a fixed temperature, pressure and volume are inversely proportional". Expressed as a formula, that's \(\frac{P_1}{P_2} = \frac{V_2}{V_1}\)


2 What is the mechanical advantage of this inclined plane if the length of the ramp is 30 ft. and the height of the green box is 5 ft.?
81% Answer Correctly
6
2
0
12

Solution

The mechanical advantage (MA) of an inclined plane is the effort distance divided by the resistance distance. In this case, the effort distance is the length of the ramp and the resistance distance is the height of the green box:

MA = \( \frac{d_e}{d_r} \) = \( \frac{30 ft.}{5 ft.} \) = 6


3 How much resistance could a 165 lb. effort force lift using a block and tackle pulley that has 8 ropes supporting the resistance?
80% Answer Correctly
1320 lbs.
1323 lbs.
1980 lbs.
660 lbs.

Solution

The mechanical advantage (MA) of a block and tackle pulley is equal to the number of times the effort force changes direction. An easy way to count how many times the effort force changes direction is to count the number of ropes that support the resistance which, in this problem, is 8. With a MA of 8, a 165 lbs. effort force could lift 165 lbs. x 8 = 1320 lbs. resistance.


4

Which of the following is not a type of bridge?

73% Answer Correctly

truss

block

arch

cable


Solution

The six basic bridge forms are beam, truss, arch, cantilever, cable, and suspension.


5

The advantage of using a third-class lever is that it increases:

37% Answer Correctly

the mechanical advantage of the lever

the force applied to the load

the speed of the load

the distance traveled by the load


Solution

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.