To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

R_ad_a = R_bd_b

Solving for R_a, our missing value, and plugging in our variables yields:

R_a = \( \frac{R_bd_b}{d_a} \) = \( \frac{55 lbs. \times 5 ft.}{8 ft.} \) = \( \frac{275 ft⋅lb}{8 ft.} \) = 34.38 lbs.

Connected gears of different numbers of teeth are used together to change the rotational speed and torque of the input force. If the smaller gear drives the larger gear, the speed of rotation will be reduced and the torque will increase. If the larger gear drives the smaller gear, the speed of rotation will increase and the torque will be reduced.

Collinear forces act along the same line of action, concurrent forces pass through a common point and coplanar forces act in a common plane.

A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.

The modulus of elasticity measures how much a material or structure will deflect under stress. Stretch modulus is longitudinal stretch (like stretching raw bread dough), shear modulus is longitudinal deflection (like the horizontal displacement of a stack of magzines when a heavy object is placed upon them), and bulk modulus is compression of volume (like the compression of a loaf of bread under a heavy can at the bottom of a grocery bag).