A gear train is two or more gears linked together. Gear trains are designed to increase or reduce the speed or torque outpout of a rotating system or change the direction of its output. The first gear in the chain is called the driver and the last gear in the chain the driven gear with the gears between them called idler gears.

Because this lever is in equilibrium, we know that the effort force at the blue arrow is equal to the resistance weight of the green box. For a lever that's in equilibrium, one method of calculating mechanical advantage (MA) is to divide the length of the effort arm (E_a) by the length of the resistance arm (R_a):

MA = \( \frac{E_a}{R_a} \) = \( \frac{5 ft.}{5 ft.} \) = 1

When a lever is in equilibrium, the torque from the effort and the resistance are equal. The equation for equilibrium is R_ad_a = R_bd_b where a and b are the two points at which effort/resistance is being applied to the lever.

In this problem, R_a and R_b are such that the lever is in equilibrium meaning that some multiple of the weight of the green box is being applied at the blue arrow. For a lever, this multiple is a function of the ratio of the distances of the box and the arrow from the fulcrum. That's why, for a lever in equilibrium, only the distances from the fulcrum are necessary to calculate mechanical advantage.

If the lever were not in equilibrium, you would first have to calculate the forces and distances necessary to put it in equilibrium and then divide E_a by R_a to get the mechanical advantage.

For any given surface, the coefficient of static friction is higher than the coefficient of kinetic friction. More force is required to initally get an object moving than is required to keep it moving. Additionally, static friction only arises in response to an attempt to move an object (overcome the normal force between it and the surface).

The wedge is a moving inclined plane that is used to lift, hold, or break apart an object. A wedge converts force applied to its blunt end into force perpendicular to its inclined surface. In contrast to a stationary plane where force is applied to the object being moved, with a wedge the object is stationary and the force is being applied to the plane. Examples of a wedge include knives and chisels.

The mechanical advantage (amount of change in speed or torque) of connected gears is proportional to the number of teeth each gear has. Called gear ratio, it's the ratio of the number of teeth on the larger gear to the number of teeth on the smaller gear.  For example, a gear with 12 teeth connected to a gear with 9 teeth would have a gear ratio of 4:3.