A wheel and axle uses two different diameter wheels mounted to a connecting axle. Force is applied to the larger wheel and large movements of this wheel result in small movements in the smaller wheel. Because a larger movement distance is being translated to a smaller distance, force is increased with a mechanical advantage equal to the ratio of the diameters of the wheels. An example of a wheel and axle is the steering wheel of a car.

Specific gravity is the ratio of the density of equal volumes of a substance and water and is measured by a hyrdometer.

A block and tackle is a combination of one or more fixed pulleys and one or more movable pulleys where the fixed pulleys change the direction of the effort force and the movable pulleys multiply it. The mechanical advantage is equal to the number of times the effort force changes direction and can be increased by adding more pulley wheels to the system. An easy way to find the mechanical advantage of a block and tackle pulley system is to count the number of ropes that support the resistance.

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.

An inclined plane is a simple machine that reduces the force needed to raise an object to a certain height. Work equals force x distance and, by increasing the distance that the object travels, an inclined plane reduces the force necessary to raise it to a particular height. In this case, the mechanical advantage is to make the task easier. An example of an inclined plane is a ramp.