A fixed pulley is used to change the direction of a force and does not multiply the force applied. As such, it has a mechanical advantage of one. The benefit of a fixed pulley is that it can allow the force to be applied at a more convenient angle, for example, pulling downward or horizontally to lift an object instead of upward.

Work is accomplished when force is applied to an object: W = Fd where F is force in newtons (N) and d is distance in meters (m). Thus, the more force that must be applied to move an object, the more work is done and the farther an object is moved by exerting force, the more work is done. By definition, work is the displacement of an object resulting from applied force.

The six basic bridge forms are beam, truss, arch, cantilever, cable, and suspension.

The six types of simple machines are the lever, wheel and axle, pulley, inclined plane, wedge, and screw.

The mechanical advantage (amount of change in speed or torque) of connected gears is proportional to the number of teeth each gear has. Called gear ratio, it's the ratio of the number of teeth on the larger gear to the number of teeth on the smaller gear.  For example, a gear with 12 teeth connected to a gear with 9 teeth would have a gear ratio of 4:3.