The mechanical advantage (MA) of a block and tackle pulley is equal to the number of times the effort force changes direction. An easy way to count how many times the effort force changes direction is to count the number of ropes that support the resistance which, in this problem, is 4. With a MA of 4, a 115 lbs. effort force could lift 115 lbs. x 4 = 460 lbs. resistance.

The mechanical advantage of a wheel and axle lies in the difference in radius between the inner (axle) wheel and the outer wheel. But, this mechanical advantage is only realized when the input effort and load are applied to different wheels. Applying both input effort and load to the same wheel results in a mechanical advantage of 1.

Hydraulics is the transmission of force through the use of liquids. Liquids are especially suited for transferring force in complex machines because they compress very little and can occupy very small spaces. Hydraulic pressure is calculated by dividing force by the area over which it is applied: P = F/A where F is force in pounds, A is area in square inches, and the resulting pressure is in pounds per square inch (psi).

This problem describes an inclined plane and, for an inclined plane, the effort force multiplied by the effort distance equals the resistance force multipied by the resistance distance:

F_ed_e = F_rd_r

Plugging in the variables from this problem yields:

F_e x 9 ft. = 460 lbs. x 1 ft.
F_e = \( \frac{460 ft⋅lb}{9 ft.} \) = 51.1 lbs.

For any given surface, the coefficient of static friction is higher than the coefficient of kinetic friction. More force is required to initally get an object moving than is required to keep it moving. Additionally, static friction only arises in response to an attempt to move an object (overcome the normal force between it and the surface).