| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.49 |
| Score | 0% | 70% |
A a seesaw / teeter-totter is an example of which of the following?
third-class lever |
|
inclined plane |
|
second-class lever |
|
first-class lever |
A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.
A shovel is an example of which class of lever?
first |
|
second |
|
third |
|
a shovel is not a lever |
A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.
Coplanar forces:
pass through a common point |
|
have opposite dimensions |
|
act along the same line of action |
|
act in a common plane |
Collinear forces act along the same line of action, concurrent forces pass through a common point and coplanar forces act in a common plane.
The steering wheel of a car is an example of which type of simple machine?
block and tackle |
|
fixed pulley |
|
wheel and axle |
|
first-class lever |
A wheel and axle uses two different diameter wheels mounted to a connecting axle. Force is applied to the larger wheel and large movements of this wheel result in small movements in the smaller wheel. Because a larger movement distance is being translated to a smaller distance, force is increased with a mechanical advantage equal to the ratio of the diameters of the wheels. An example of a wheel and axle is the steering wheel of a car.
Friction between two or more solid objects that are not moving relative to each other is called:
dynamic friction |
|
kinetic friction |
|
static friction |
|
gravitational friction |
Static friction is friction between two or more solid objects that are not moving relative to each other. An example is the friction that prevents a box on a sloped surface from sliding farther down the surface.