ASVAB Mechanical Comprehension Practice Test 511331 Results

Your Results Global Average
Questions 5 5
Correct 0 3.01
Score 0% 60%

Review

1

Which of the following is not true of a  first-class lever?

51% Answer Correctly

increases force

changes the direction of force

decreases distance

increases distance


Solution

A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.


2

Potential energy is energy that has the potential to be converted into what?

80% Answer Correctly

 kinetic energy

work

heat

power


Solution

Potential energy is the energy of an object by virtue of its position relative to other objects. It is energy that has the potential to be converted into kinetic energy.


3

What type of load acts on a relatively small area of a structure?

74% Answer Correctly

non-uniformly distributed load

impact load

dynamic load

concentrated load


Solution

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.


4

A screw is most like which of the following other simple machines?

49% Answer Correctly

inclined plane

block and tackle

wheel and axle

first-class lever


Solution

A screw is an inclined plane wrapped in ridges (threads) around a cylinder. The distance between these ridges defines the pitch of the screw and this distance is how far the screw advances when it is turned once. The mechanical advantage of a screw is its circumference divided by the pitch.


5 If A = 11 ft., B = 3 ft., C = 10 ft., the green box weighs 50 lbs. and the blue box weighs 70 lbs., what does the orange box have to weigh for this lever to balance?
44% Answer Correctly
136 lbs.
150 lbs.
0 lbs.
34 lbs.

Solution
In order for this lever to balance, the torque acting on each side of the fulrum must be equal. So, the torque produced by A must equal the torque produced by B and C. Torque is weight x distance from the fulcrum which means that the following must be true for the lever to balance:

fAdA = fBdB + fCdC

For this problem, this equation becomes:

50 lbs. x 11 ft. = 70 lbs. x 3 ft. + fC x 10 ft.

550 ft. lbs. = 210 ft. lbs. + fC x 10 ft.

fC = \( \frac{550 ft. lbs. - 210 ft. lbs.}{10 ft.} \) = \( \frac{340 ft. lbs.}{10 ft.} \) = 34 lbs.