ASVAB Mechanical Comprehension Practice Test 511675 Results

	Your Results	Global Average
Questions	5	5
Correct	0	3.37
Score	0%	67%

Review

Lisa lifts a 25 pound box from the floor onto a loading dock 4 ft. off the ground. Sam slides the same box along a ramp to move it up another 4 ft. onto a flatbed truck. Who has done more work?

50% Answer Correctly

	Sam
	Lisa
	Neither have done any work
	They have done an equal amount of work

Solution

Work is force multiplied by distance. Because both Connie and Sam moved the same weight the same distance they have done an equal amount of work. Sam employed the mechnacial advantage of an inclined plane so he exerted less effort to do the work but the amount of work done was still the same.

Friction resists movement in a direction __________ to the movement.

81% Answer Correctly

	opposite
	normal
	parallel
	perpendicular

Solution

Friction resists movement. Kinetic (also called sliding or dynamic) friction resists movement in a direction opposite to the movement. Because it opposes movement, kinetic friction will eventually bring an object to a stop. An example is a rock that's sliding across ice.

If the handles of a wheelbarrow are 3 ft. from the wheel axle, what force must you exert to lift the handles if it's carrying a 270 lb. load concentrated at a point 0.5 ft. from the axle?

56% Answer Correctly

	0.83 lbs
	45 lbs
	90 lbs
	810 lbs

Solution

This problem describes a second-class lever and, for a second class lever, the effort force multiplied by the effort distance equals the resistance force multipied by the resistance distance: F_ed_e = F_rd_r. Plugging in the variables from this problem yields:

F_e x 3 ft. = 270 lbs x 0.5 ft
F_e = 135 ft-lb. / 3 ft
F_e= 45 lbs

4 If you have a gear train with two gears, the first with 36 teeth and the second with 8 teeth, how many revolutions does the second gear make for each revolution of the first gear?

77% Answer Correctly

	9.5
	4.5
	9
	6.8

Solution

The gear ratio (V_r) of a gear train is the product of the gear ratios between the pairs of meshed gears. Let N represent the number of teeth for each gear:

V_r = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) \( \frac{N_3}{N_4} \) ... \( \frac{N_n}{N_{n+1}} \)

In this problem, we have only two gears so the equation becomes:

V_r = \( \frac{N_1}{N_2} \) = \( \frac{36}{8} \) = 4.5

The force exerted on an object due to gravity is called:

70% Answer Correctly

	mass
	density
	weight
	potential energy

Solution

Mass is an intrinsic property of matter and does not vary. Weight is the force exerted on the mass of an object due to gravity and a specific case of Newton's Second Law of Motion. Replace force with weight and acceleration with acceleration due to gravity on Earth (g) and the result is the formula for weight: W = mg or, substituting for g, weight equals mass multiplied by 9.8 m/s².