| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 2.84 |
| Score | 0% | 57% |
Lisa lifts a 25 pound box from the floor onto a loading dock 4 ft. off the ground. Sam slides the same box along a ramp to move it up another 4 ft. onto a flatbed truck. Who has done more work?
They have done an equal amount of work |
|
Lisa |
|
Sam |
|
Neither have done any work |
Work is force multiplied by distance. Because both Connie and Sam moved the same weight the same distance they have done an equal amount of work. Sam employed the mechnacial advantage of an inclined plane so he exerted less effort to do the work but the amount of work done was still the same.
Which of the following will increase the mechanical advantage of this inclined plane?
shorten the ramp |
|
increase the force acting at the blue arrow |
|
lengthen the ramp |
|
lower the force acting at the blue arrow |
The mechanical advantage (MA) of an inclined plane is the effort distance divided by the resistance distance. In order to increase mechanical advantage, this ratio must increase which means making the effort distance longer and this can be accomplished by lengthening the length of the ramp.
| 3.57 lbs. | |
| 175 lbs. | |
| 10.71 lbs. | |
| 2.68 lbs. |
To balance this lever the torques at the green box and the blue arrow must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:
Rada = Rbdb
where a represents the green box and b the blue arrow, R is resistance (weight/force) and d is the distance from the fulcrum.Solving for Rb, our missing value, and plugging in our variables yields:
Rb = \( \frac{R_ad_a}{d_b} \) = \( \frac{25 lbs. \times 3 ft.}{7 ft.} \) = \( \frac{75 ft⋅lb}{7 ft.} \) = 10.71 lbs.
If the handles of a wheelbarrow are 3 ft. from the wheel axle, what force must you exert to lift the handles if it's carrying a 270 lb. load concentrated at a point 0.5 ft. from the axle?
90 lbs |
|
810 lbs |
|
45 lbs |
|
0.83 lbs |
This problem describes a second-class lever and, for a second class lever, the effort force multiplied by the effort distance equals the resistance force multipied by the resistance distance: Fede = Frdr. Plugging in the variables from this problem yields:
Fe x 3 ft. = 270 lbs x 0.5 ft
Fe = 135 ft-lb. / 3 ft
Fe = 45 lbs
Which of the following is not a type of simple machine?
gear |
|
lever |
|
screw |
|
pulley |
The six types of simple machines are the lever, wheel and axle, pulley, inclined plane, wedge, and screw.