Tension is a force that stretches or elongates something. When a cable or rope is used to pull an object, for example, it stretches internally as it accepts the weight that it's moving. Although tension is often treated as applying equally to all parts of a material, it's greater at the places where the material is under the most stress.

Mechanical advantage (MA) is the ratio by which effort force relates to resistance force. If both forces are known, calculating MA is simply a matter of dividing resistance force by effort force:

MA = \( \frac{F_r}{F_e} \) = \( \frac{2 ft.}{2.5 ft.} \) = 0.8

In this case, the mechanical advantage is less than one meaning that each unit of effort force results in just 0.8 units of resistance force. However, a third class lever like this isn't designed to multiply force like a first class lever. A third class lever is designed to multiply distance and speed at the resistance by sacrificing force at the resistance. Different lever styles have different purposes and multiply forces in different ways.

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

Two or more pulleys used together constitute a block and tackle which, unlike a fixed pulley, does impart mechanical advantage as a function of the number of pulleys that make up the arrangement.  So, for example, a block and tackle with three pulleys would have a mechanical advantage of three.

Newton's Second Law of Motion states that "The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object." This Law describes the linear relationship between mass and acceleration when it comes to force and leads to the formula F = ma or force equals mass multiplied by rate of acceleration.