Drag is friction that opposes movement through a fluid like liquid or air. The amount of drag depends on the shape and speed of the object with slower objects experiencing less drag than faster objects and more aerodynamic objects experiencing less drag than those with a large leading surface area.

A gear train is two or more gears linked together. Gear trains are designed to increase or reduce the speed or torque outpout of a rotating system or change the direction of its output. The first gear in the chain is called the driver and the last gear in the chain the driven gear with the gears between them called idler gears.

A fixed pulley is used to change the direction of a force and does not multiply the force applied. As such, it has a mechanical advantage of one. The benefit of a fixed pulley is that it can allow the force to be applied at a more convenient angle, for example, pulling downward or horizontally to lift an object instead of upward.

For any given surface, the coefficient of static friction is higher than the coefficient of kinetic friction. More force is required to initally get an object moving than is required to keep it moving. Additionally, static friction only arises in response to an attempt to move an object (overcome the normal force between it and the surface).

Mechanical advantage (MA) is the ratio by which effort force relates to resistance force. If both forces are known, calculating MA is simply a matter of dividing resistance force by effort force:

MA = \( \frac{F_r}{F_e} \) = \( \frac{3 ft.}{7.5 ft.} \) = 0.4

In this case, the mechanical advantage is less than one meaning that each unit of effort force results in just 0.4 units of resistance force. However, a third class lever like this isn't designed to multiply force like a first class lever. A third class lever is designed to multiply distance and speed at the resistance by sacrificing force at the resistance. Different lever styles have different purposes and multiply forces in different ways.