ASVAB Mechanical Comprehension Practice Test 554897 Results

Your Results Global Average
Questions 5 5
Correct 0 2.91
Score 0% 58%

Review

1

Collinear forces:

72% Answer Correctly

act in a common plane

act along the same line of action

are unrelated to each other

pass through a common point


Solution

Collinear forces act along the same line of action, concurrent forces pass through a common point and coplanar forces act in a common plane.


2

The advantage of using a third-class lever is that it increases:

37% Answer Correctly

the mechanical advantage of the lever

the distance traveled by the load

the speed of the load

the force applied to the load


Solution

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.


3

Boyle's law defines the relationship between pressure and volume as:

57% Answer Correctly

\(\frac{P_1}{P_2} = \frac{V_2}{V_1}\)

\(\frac{P_1}{P_2} = {V_1}{V_2}\)

\({P_1}{P_2} = {V_1}{V_2}\)

\(\frac{P_1}{P_2} = \frac{V_1}{V_2}\)


Solution

Boyle's law states that "for a fixed amount of an ideal gas kept at a fixed temperature, pressure and volume are inversely proportional". Expressed as a formula, that's \(\frac{P_1}{P_2} = \frac{V_2}{V_1}\)


4

Which of the following is not true of a  first-class lever?

51% Answer Correctly

decreases distance

increases distance

changes the direction of force

increases force


Solution

A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.


5

The force exerted on an object due to gravity is called:

69% Answer Correctly

mass

density

potential energy

weight


Solution

Mass is an intrinsic property of matter and does not vary. Weight is the force exerted on the mass of an object due to gravity and a specific case of Newton's Second Law of Motion. Replace force with weight and acceleration with acceleration due to gravity on Earth (g) and the result is the formula for weight: W = mg or, substituting for g, weight equals mass multiplied by 9.8 m/s2.