ASVAB Mechanical Comprehension Practice Test 572397 Results

Your Results Global Average
Questions 5 5
Correct 0 2.97
Score 0% 59%

Review

1

Power is the rate at which:

62% Answer Correctly

potential energy is converted into kinetic energy

input force is transferred to output force

work is done

friction is overcome


Solution

Power is the rate at which work is done, P = w/t, or work per unit time. The watt (W) is the unit for power and is equal to 1 joule (or newton-meter) per second. Horsepower (hp) is another familiar unit of power used primarily for rating internal combustion engines. 1 hp equals 746 watts.


2

Which of the following is the formula for torque?

61% Answer Correctly

τ = F/r

τ = F/r2

τ = rF

τ = r/F


Solution

Torque measures force applied during rotation: τ = rF.  Torque (τ, the Greek letter tau) = the radius of the lever arm (r) multiplied by the force (F) applied. Radius is measured from the center of rotation or fulcrum to the point at which the perpendicular force is being applied. The resulting unit for torque is newton-meter (N-m) or foot-pound (ft-lb).


3

The work done by the sum of all forces acting on a particle equals the change in the kinetic energy of the particle. This defines which of the following?

60% Answer Correctly

mechanical advantage

work-energy theorem

Pascal's law

conservation of mechanical energy


Solution

The work-energy theorem states that the work done by the sum of all forces acting on a particle equals the change in the kinetic energy of the particle. Simply put, work imparts kinetic energy to the matter upon which the work is being done.


4

Which of the following is not a type of structural load?

50% Answer Correctly

occupancy load

wind load

live load

dead load


Solution

Dead load is the weight of the building and materials, live load is additional weight due to occupancy or use, snow load is the weight of accumulated snow on a structure and wind load is the force of wind pressures against structure surfaces.


5 A = 6 ft., the green box weighs 50 lbs., and the blue box weighs 80 lbs. What does distance B need to be for this lever to balance?
65% Answer Correctly
3.75 ft.
300 ft.
15 ft.
11.25 ft.

Solution
In order for this lever to balance, the torque acting on side A must equal the torque acting on side B. Torque is weight x distance from the fulcrum which means that the following must be true for the lever to balance:

fAdA = fBdB

For this problem, the equation becomes:

50 lbs. x 6 ft. = 80 lbs. x dB

dB = \( \frac{50 \times 6 ft⋅lb}{80 lbs.} \) = \( \frac{300 ft⋅lb}{80 lbs.} \) = 3.75 ft.