ASVAB Mechanical Comprehension Practice Test 57647 Results

Your Results Global Average
Questions 5 5
Correct 0 3.36
Score 0% 67%

Review

1 What is the mechanical advantage of this inclined plane if the length of the ramp is 8 ft. and the height of the green box is 1 ft.?
81% Answer Correctly
8
24
7.2
8.8

Solution

The mechanical advantage (MA) of an inclined plane is the effort distance divided by the resistance distance. In this case, the effort distance is the length of the ramp and the resistance distance is the height of the green box:

MA = \( \frac{d_e}{d_r} \) = \( \frac{8 ft.}{1 ft.} \) = 8


2

Friction between two or more solid objects that are not moving relative to each other is called:

73% Answer Correctly

kinetic friction

gravitational friction

static friction

dynamic friction


Solution

Static friction is friction between two or more solid objects that are not moving relative to each other. An example is the friction that prevents a box on a sloped surface from sliding farther down the surface.


3 If the green box is 2 ft. from the fulcrum and a certain force applied 7 ft. from the fulcrum at the blue arrow balances the lever, what is the mechanical advantage?
60% Answer Correctly
7
11.5
3.5
1.75

Solution

Because this lever is in equilibrium, we know that the effort force at the blue arrow is equal to the resistance weight of the green box. For a lever that's in equilibrium, one method of calculating mechanical advantage (MA) is to divide the length of the effort arm (Ea) by the length of the resistance arm (Ra):

MA = \( \frac{E_a}{R_a} \) = \( \frac{7 ft.}{2 ft.} \) = 3.5

When a lever is in equilibrium, the torque from the effort and the resistance are equal. The equation for equilibrium is Rada = Rbdb where a and b are the two points at which effort/resistance is being applied to the lever.

In this problem, Ra and Rb are such that the lever is in equilibrium meaning that some multiple of the weight of the green box is being applied at the blue arrow. For a lever, this multiple is a function of the ratio of the distances of the box and the arrow from the fulcrum. That's why, for a lever in equilibrium, only the distances from the fulcrum are necessary to calculate mechanical advantage.

If the lever were not in equilibrium, you would first have to calculate the forces and distances necessary to put it in equilibrium and then divide Ea by Ra to get the mechanical advantage.


4

The mechanical advantage of a wheel and axle is equal to the:

61% Answer Correctly

length of the axle

ratio of the diameters of the wheels

difference in the diameters of the wheels

difference in the lengths of the axles


Solution

A wheel and axle uses two different diameter wheels mounted to a connecting axle. Force is applied to the larger wheel and large movements of this wheel result in small movements in the smaller wheel. Because a larger movement distance is being translated to a smaller distance, force is increased with a mechanical advantage equal to the ratio of the diameters of the wheels. An example of a wheel and axle is the steering wheel of a car.


5

What type of load doesn't create specific stress points or vary with time?

59% Answer Correctly

static uniformly distributed load

impact load

concentrated load

non-uniformly distributed load


Solution

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.