| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 2.62 |
| Score | 0% | 52% |
Depending on where you apply effort and resistance, the wheel and axle can multiply:
power or distance |
|
force or distance |
|
speed or power |
|
force or speed |
If you apply the resistance to the axle and the effort to the wheel, the wheel and axle will multiply force and if you apply the resistance to the wheel and the effort to the axle, it will multiply speed.
Assuming force applied remains constant, which of the following will result in more work being done?
increasing the coefficient of friction |
|
moving the object farther |
|
moving the object with more speed |
|
moving the object with more acceleration |
Work is accomplished when force is applied to an object: W = Fd where F is force in newtons (N) and d is distance in meters (m). Thus, the more force that must be applied to move an object, the more work is done and the farther an object is moved by exerting force, the more work is done.
Which of the following represents how much two materials resist sliding across each other?
normal friction |
|
coefficient of friction |
|
kinetic friction |
|
static friction |
Coefficient of friction (μ) represents how much two materials resist sliding across each other. Smooth surfaces like ice have low coefficients of friction while rough surfaces like concrete have high μ.
For any given surface, the coefficient of static friction is ___________ the coefficient of kinetic friction.
higher than |
|
equal to |
|
lower than |
|
opposite |
For any given surface, the coefficient of static friction is higher than the coefficient of kinetic friction. More force is required to initally get an object moving than is required to keep it moving. Additionally, static friction only arises in response to an attempt to move an object (overcome the normal force between it and the surface).
| 20.5 psi | |
| 29.5 psi | |
| 10.2 psi | |
| 23.5 psi |
According to Boyle's Law, pressure and volume are inversely proportional:
\( \frac{P_1}{P_2} \) = \( \frac{V_2}{V_1} \)
In this problem, V2 = 55 ft.3, V1 = 75 ft.3 and P1 = 15.0 psi. Solving for P2:
P2 = \( \frac{P_1}{\frac{V_2}{V_1}} \) = \( \frac{15.0 psi}{\frac{55 ft.^3}{75 ft.^3}} \) = 20.5 psi