ASVAB Mechanical Comprehension Practice Test 597024 Results

Your Results Global Average
Questions 5 5
Correct 0 3.04
Score 0% 61%

Review

1 If the radius of the axle is 7 and the radius of the wheel is 12, what is the mechanical advantage of this wheel and axle configuration?
36% Answer Correctly
1
-5
1
7

Solution

The mechanical advantage of a wheel and axle lies in the difference in radius between the inner (axle) wheel and the outer wheel. But, this mechanical advantage is only realized when the input effort and load are applied to different wheels. Applying both input effort and load to the same wheel results in a mechanical advantage of 1.


2

Friction between two or more solid objects that are not moving relative to each other is called:

73% Answer Correctly

kinetic friction

static friction

dynamic friction

gravitational friction


Solution

Static friction is friction between two or more solid objects that are not moving relative to each other. An example is the friction that prevents a box on a sloped surface from sliding farther down the surface.


3

What's the first gear in a gear train called?

57% Answer Correctly

idler gear

input gear

driven gear

driver gear


Solution

A gear train is two or more gears linked together. Gear trains are designed to increase or reduce the speed or torque outpout of a rotating system or change the direction of its output. The first gear in the chain is called the driver and the last gear in the chain the driven gear with the gears between them called idler gears.


4

Which of these is the formula for kinetic energy?

67% Answer Correctly

\(KE = {m \over v^2 }\)

\(KE = {1 \over 2}mh^2\)

\(KE = mgh\)

\(KE = {1 \over 2}mv^2\)


Solution

Kinetic energy is the energy of movement and is a function of the mass of an object and its speed: \(KE = {1 \over 2}mv^2\) where m is mass in kilograms, v is speed in meters per second, and KE is in joules. The most impactful quantity to kinetic energy is velocity as an increase in mass increases KE linearly while an increase in speed increases KE exponentially.


5

The mechanical advantage of a block and tackle is equal to which of the following?

69% Answer Correctly

the number of loads

the number of input forces

the number of connecting ropes

the number of pulleys


Solution

Two or more pulleys used together constitute a block and tackle which, unlike a fixed pulley, does impart mechanical advantage as a function of the number of pulleys that make up the arrangement.  So, for example, a block and tackle with three pulleys would have a mechanical advantage of three.