| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 2.66 |
| Score | 0% | 53% |
The advantage of using a third-class lever is that it increases:
the speed of the load |
|
the distance traveled by the load |
|
the force applied to the load |
|
the mechanical advantage of the lever |
A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.
The measure of how much of the power put into a machine is turned into movement or force is called:
mechanical advantage |
|
power |
|
efficiency |
|
force multiplication |
The efficiency of a machine describes how much of the power put into the machine is turned into movement or force. A 100% efficient machine would turn all of the input power into output movement or force. However, no machine is 100% efficient due to friction, heat, wear and other imperfections that consume input power without delivering any output.
The mechanical advantage of a wheel and axle is equal to the:
difference in the lengths of the axles |
|
ratio of the diameters of the wheels |
|
difference in the diameters of the wheels |
|
length of the axle |
A wheel and axle uses two different diameter wheels mounted to a connecting axle. Force is applied to the larger wheel and large movements of this wheel result in small movements in the smaller wheel. Because a larger movement distance is being translated to a smaller distance, force is increased with a mechanical advantage equal to the ratio of the diameters of the wheels. An example of a wheel and axle is the steering wheel of a car.
Lisa lifts a 25 pound box from the floor onto a loading dock 4 ft. off the ground. Sam slides the same box along a ramp to move it up another 4 ft. onto a flatbed truck. Who has done more work?
Lisa |
|
They have done an equal amount of work |
|
Sam |
|
Neither have done any work |
Work is force multiplied by distance. Because both Connie and Sam moved the same weight the same distance they have done an equal amount of work. Sam employed the mechnacial advantage of an inclined plane so he exerted less effort to do the work but the amount of work done was still the same.
What is the first step to solving a problem where multiple forces are acting on an object?
calculate the net force |
|
calculate the total force |
|
calculate kinetic energy |
|
calculate potential energy |
In mechanics, multiple forces are often acting on a particular object and, taken together, produce the net force acting on that object. Like force, net force is a vector quantity in that it has magnitude and direction.