ASVAB Mechanical Comprehension Practice Test 627767 Results

Your Results Global Average
Questions 5 5
Correct 0 3.20
Score 0% 64%

Review

1

Which of the following is the formula for hydraulic pressure?

58% Answer Correctly

P = F/A

P = FA

P = F/A2

P = FA2


Solution

Hydraulics is the transmission of force through the use of liquids. Liquids are especially suited for transferring force in complex machines because they compress very little and can occupy very small spaces. Hydraulic pressure is calculated by dividing force by the area over which it is applied: P = F/A where F is force in pounds, A is area in square inches, and the resulting pressure is in pounds per square inch (psi).


2

Assuming force applied remains constant, which of the following will result in more work being done?

53% Answer Correctly

moving the object with more speed

moving the object with more acceleration

moving the object farther

increasing the coefficient of friction


Solution

Work is accomplished when force is applied to an object: W = Fd where F is force in newtons (N) and d is distance in meters (m). Thus, the more force that must be applied to move an object, the more work is done and the farther an object is moved by exerting force, the more work is done.


3

The force required to initally get an object moving is __________ the force required to keep it moving. 

76% Answer Correctly

higher than

the same as

lower than

opposite


Solution

For any given surface, the coefficient of static friction is higher than the coefficient of kinetic friction. More force is required to initally get an object moving than is required to keep it moving. Additionally, static friction only arises in response to an attempt to move an object (overcome the normal force between it and the surface).


4

Potential energy is energy that has the potential to be converted into what?

80% Answer Correctly

power

 kinetic energy

work

heat


Solution

Potential energy is the energy of an object by virtue of its position relative to other objects. It is energy that has the potential to be converted into kinetic energy.


5 If the radius of the axle is 7 and the radius of the wheel is 8, what is the mechanical advantage of this wheel and axle configuration?
52% Answer Correctly
8
7
1
1.14

Solution

The mechanical advantage of a wheel and axle is the input radius divided by the output radius:

MA = \( \frac{r_i}{r_o} \)

In this case, the input radius (where the effort force is being applied) is 8 and the output radius (where the resistance is being applied) is 7 for a mechanical advantage of \( \frac{8}{7} \) = 1.14