Torque measures force applied during rotation: τ = rF.  Torque (τ, the Greek letter tau) = the radius of the lever arm (r) multiplied by the force (F) applied. Radius is measured from the center of rotation or fulcrum to the point at which the perpendicular force is being applied. The resulting unit for torque is newton-meter (N-m) or foot-pound (ft-lb).

The mechanical advantage (MA) of an inclined plane is the effort distance divided by the resistance distance. In this case, the effort distance is the length of the ramp and the resistance distance is the height of the green box:

MA = \( \frac{d_e}{d_r} \) = \( \frac{24 ft.}{8 ft.} \) = 3

To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

R_ad_a = R_bd_b

Solving for R_a, our missing value, and plugging in our variables yields:

R_a = \( \frac{R_bd_b}{d_a} \) = \( \frac{60 lbs. \times 5 ft.}{8 ft.} \) = \( \frac{300 ft⋅lb}{8 ft.} \) = 37.5 lbs.

Pascal's law states that a pressure change occurring anywhere in a confined incompressible fluid is transmitted throughout the fluid such that the same change occurs everywhere. For a hydraulic system, this means that a pressure applied to the input of the system will increase the pressure everywhere in the system.

Hydraulics is the transmission of force through the use of liquids. Liquids are especially suited for transferring force in complex machines because they compress very little and can occupy very small spaces. Hydraulic pressure is calculated by dividing force by the area over which it is applied: P = F/A where F is force in pounds, A is area in square inches, and the resulting pressure is in pounds per square inch (psi).