Torque measures force applied during rotation: τ = rF.  Torque (τ, the Greek letter tau) = the radius of the lever arm (r) multiplied by the force (F) applied. Radius is measured from the center of rotation or fulcrum to the point at which the perpendicular force is being applied. The resulting unit for torque is newton-meter (N-m) or foot-pound (ft-lb).

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

A gear train is two or more gears linked together. Gear trains are designed to increase or reduce the speed or torque outpout of a rotating system or change the direction of its output. The first gear in the chain is called the driver and the last gear in the chain the driven gear with the gears between them called idler gears.

The more mass a substance has the more force is required to move it or to change its direction. This resistance to changes in direction is known as inertia.

Mechanics deals with motion and the forces that produce motion.