Mechanical advantage (MA) is the ratio by which effort force relates to resistance force. If both forces are known, calculating MA is simply a matter of dividing resistance force by effort force:

MA = \( \frac{F_r}{F_e} \) = \( \frac{4 ft.}{4.44 ft.} \) = 0.9

In this case, the mechanical advantage is less than one meaning that each unit of effort force results in just 0.9 units of resistance force. However, a third class lever like this isn't designed to multiply force like a first class lever. A third class lever is designed to multiply distance and speed at the resistance by sacrificing force at the resistance. Different lever styles have different purposes and multiply forces in different ways.

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.

Connected gears of different numbers of teeth are used together to change the rotational speed and torque of the input force. If the smaller gear drives the larger gear, the speed of rotation will be reduced and the torque will increase. If the larger gear drives the smaller gear, the speed of rotation will increase and the torque will be reduced.

A wheel and axle uses two different diameter wheels mounted to a connecting axle. Force is applied to the larger wheel and large movements of this wheel result in small movements in the smaller wheel. Because a larger movement distance is being translated to a smaller distance, force is increased with a mechanical advantage equal to the ratio of the diameters of the wheels. An example of a wheel and axle is the steering wheel of a car.

If you apply the resistance to the axle and the effort to the wheel, the wheel and axle will multiply force and if you apply the resistance to the wheel and the effort to the axle, it will multiply speed.