A second-class lever is used to increase force on an object in the same direction as the force is applied. This lever requires a smaller force to lift a larger load but the force must be applied over a greater distance. The fulcrum is placed at one end of the lever and mechanical advantage increases as the object being lifted is moved closer to the fulcrum or the length of the lever is increased. An example of a second-class lever is a wheelbarrow.

To balance this lever the torques at the green box and the blue arrow must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

R_ad_a = R_bd_b

Solving for R_a, our missing value, and plugging in our variables yields:

R_a = \( \frac{R_bd_b}{d_a} \) = \( \frac{45 lbs. \times 8 ft.}{4 ft.} \) = \( \frac{360 ft⋅lb}{4 ft.} \) = 90 lbs.

Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. Such a device utilizes input force and trades off forces against movement to amplify and/or change its direction.

Pascal's law states that a pressure change occurring anywhere in a confined incompressible fluid is transmitted throughout the fluid such that the same change occurs everywhere. For a hydraulic system, this means that a pressure applied to the input of the system will increase the pressure everywhere in the system.

Specific gravity is the ratio of the density of equal volumes of a substance and water and is measured by a hyrdometer.