Tension is a force that stretches or elongates something. When a cable or rope is used to pull an object, for example, it stretches internally as it accepts the weight that it's moving. Although tension is often treated as applying equally to all parts of a material, it's greater at the places where the material is under the most stress.

Connected gears of different numbers of teeth are used together to change the rotational speed and torque of the input force. If the smaller gear drives the larger gear, the speed of rotation will be reduced and the torque will increase. If the larger gear drives the smaller gear, the speed of rotation will increase and the torque will be reduced.

Pascal's law states that a pressure change occurring anywhere in a confined incompressible fluid is transmitted throughout the fluid such that the same change occurs everywhere. For a hydraulic system, this means that a pressure applied to the input of the system will increase the pressure everywhere in the system.

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

Mechanical advantage (MA) can be calculated knowing only the distance the effort (blue arrow) moves and the distance the resistance (green box) moves. The equation is:

MA = \( \frac{E_d}{R_d} \)

where E_d is the effort distance and R_d is the resistance distance. For this problem, the equation becomes:

MA = \( \frac{6 ft.}{3.0 ft.} \) = 2

You might be wondering how having an effort distance of 2 times the resistance distance is an advantage. Remember the principle of moments. For a lever in equilibrium the effort torque equals the resistance torque. Because torque is force x distance, if the effort distance is 2 times the resistance distance, the effort force must be \( \frac{1}{2} \) the resistance force. You're trading moving 2 times the distance for only having to use \( \frac{1}{2} \) the force.