A second-class lever is used to increase force on an object in the same direction as the force is applied. This lever requires a smaller force to lift a larger load but the force must be applied over a greater distance. The fulcrum is placed at one end of the lever and mechanical advantage increases as the object being lifted is moved closer to the fulcrum or the length of the lever is increased. An example of a second-class lever is a wheelbarrow.

Mass is a measure of the amount of matter in an object.  In general, larger objects have larger mass than smaller objects but mass ultimately depends on how compact (dense) a substance is.

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

The mechanical advantage (MA) of a wedge is its length divided by its thickness:

MA = \( \frac{l}{t} \) = \( \frac{4 in.}{2 in.} \) = 2

Specific gravity is the ratio of the density of equal volumes of a substance and water and is measured by a hyrdometer.