To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

R_ad_a = R_bd_b

Solving for d_b, our missing value, and plugging in our variables yields:

d_b = \( \frac{R_ad_a}{R_b} \) = \( \frac{65 lbs. \times 5 ft.}{15 lbs.} \) = \( \frac{325 ft⋅lb}{15 lbs.} \) = 21.67 ft.

Mass is an intrinsic property of matter and does not vary. Weight is the force exerted on the mass of an object due to gravity and a specific case of Newton's Second Law of Motion. Replace force with weight and acceleration with acceleration due to gravity on Earth (g) and the result is the formula for weight: W = mg or, substituting for g, weight equals mass multiplied by 9.8 m/s².

According to Boyle's Law, pressure and volume are inversely proportional:

\( \frac{P_1}{P_2} \) = \( \frac{V_2}{V_1} \)

In this problem, V₂ = 25 ft.³, V₁ = 45 ft.³ and P₁ = 9.0 psi. Solving for P₂:

P₂ = \( \frac{P_1}{\frac{V_2}{V_1}} \) = \( \frac{9.0 psi}{\frac{25 ft.^3}{45 ft.^3}} \) = 16.2 psi

Newton's Second Law of Motion states that "The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object." This Law describes the linear relationship between mass and acceleration when it comes to force and leads to the formula F = ma or force equals mass multiplied by rate of acceleration.

The mechanical advantage (amount of change in speed or torque) of connected gears is proportional to the number of teeth each gear has. Called gear ratio, it's the ratio of the number of teeth on the larger gear to the number of teeth on the smaller gear.  For example, a gear with 12 teeth connected to a gear with 9 teeth would have a gear ratio of 4:3.