ASVAB Mechanical Comprehension Practice Test 747752 Results

Your Results Global Average
Questions 5 5
Correct 0 3.08
Score 0% 62%

Review

1

Power is the rate at which:

62% Answer Correctly

work is done

input force is transferred to output force

potential energy is converted into kinetic energy

friction is overcome


Solution

Power is the rate at which work is done, P = w/t, or work per unit time. The watt (W) is the unit for power and is equal to 1 joule (or newton-meter) per second. Horsepower (hp) is another familiar unit of power used primarily for rating internal combustion engines. 1 hp equals 746 watts.


2

Concurrent forces:

55% Answer Correctly

act along the same line of action

pass through a common point

act in a common plane

act in a common dimension


Solution

Collinear forces act along the same line of action, concurrent forces pass through a common point and coplanar forces act in a common plane.


3

The force amplification achieved by using a tool, mechanical device or machine system is called:

80% Answer Correctly

work

power

mechanical advantage

efficiency


Solution

Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. Such a device utilizes input force and trades off forces against movement to amplify and/or change its direction.


4

If the handles of a wheelbarrow are 3 ft. from the wheel axle, what force must you exert to lift the handles if it's carrying a 270 lb. load concentrated at a point 0.5 ft. from the axle?

56% Answer Correctly

810 lbs

90 lbs

45 lbs

0.83 lbs


Solution

This problem describes a second-class lever and, for a second class lever, the effort force multiplied by the effort distance equals the resistance force multipied by the resistance distance: Fede = Frdr. Plugging in the variables from this problem yields:

Fe x 3 ft. = 270 lbs x 0.5 ft
Fe = 135 ft-lb. / 3 ft 
Fe = 45 lbs


5 If the green box weighs 50 lbs. and 65 lbs. of force is applied 9 ft. from the fulcrum at the blue arrow, how far from the fulcrum would the green box need to be placed to balance the lever?
55% Answer Correctly
11.7 ft.
2.93 ft.
35.1 ft.
0 ft.

Solution

To balance this lever the torques at the green box and the blue arrow must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

Rada = Rbdb

where a represents the green box and b the blue arrow, R is resistance (weight/force) and d is the distance from the fulcrum.

Solving for da, our missing value, and plugging in our variables yields:

da = \( \frac{R_bd_b}{R_a} \) = \( \frac{65 lbs. \times 9 ft.}{50 lbs.} \) = \( \frac{585 ft⋅lb}{50 lbs.} \) = 11.7 ft.