Two or more pulleys used together constitute a block and tackle which, unlike a fixed pulley, does impart mechanical advantage as a function of the number of pulleys that make up the arrangement.  So, for example, a block and tackle with three pulleys would have a mechanical advantage of three.

The formula for force of friction (F_f) is the same whether kinetic or static friction applies: F_{f =} μF_N. To distinguish between kinetic and static friction, μ_k and μ_s are often used in place of μ.

Hydraulics is the transmission of force through the use of liquids. Liquids are especially suited for transferring force in complex machines because they compress very little and can occupy very small spaces. Hydraulic pressure is calculated by dividing force by the area over which it is applied: P = F/A where F is force in pounds, A is area in square inches, and the resulting pressure is in pounds per square inch (psi).

According to Boyle's Law, pressure and volume are inversely proportional:

\( \frac{P_1}{P_2} \) = \( \frac{V_2}{V_1} \)

In this problem, V₂ = 55 ft.³, V₁ = 60 ft.³ and P₁ = 12.0 psi. Solving for P₂:

P₂ = \( \frac{P_1}{\frac{V_2}{V_1}} \) = \( \frac{12.0 psi}{\frac{55 ft.^3}{60 ft.^3}} \) = 13.1 psi

The mechanical advantage (amount of change in speed or torque) of connected gears is proportional to the number of teeth each gear has. Called gear ratio, it's the ratio of the number of teeth on the larger gear to the number of teeth on the smaller gear.  For example, a gear with 12 teeth connected to a gear with 9 teeth would have a gear ratio of 4:3.