ASVAB Mechanical Comprehension Practice Test 764725 Results

Your Results Global Average
Questions 5 5
Correct 0 3.37
Score 0% 67%

Review

1 If you have a gear train with two gears, the first with 28 teeth and the second with 16 teeth, how many revolutions does the second gear make for each revolution of the first gear?
77% Answer Correctly
3.3
0.6
1.9
1.8

Solution

The gear ratio (Vr) of a gear train is the product of the gear ratios between the pairs of meshed gears. Let N represent the number of teeth for each gear:

Vr = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) \( \frac{N_3}{N_4} \) ... \( \frac{N_n}{N_{n+1}} \)

In this problem, we have only two gears so the equation becomes:

Vr = \( \frac{N_1}{N_2} \) = \( \frac{28}{16} \) = 1.8


2

Which of the following statements about drag is false?

58% Answer Correctly

drag occurs during movement through a fluid

slower objects experience more drag than faster objects

the amount of drag depends on the speed of an object

the amount of drag depends on the shape of an object


Solution

Drag is friction that opposes movement through a fluid like liquid or air. The amount of drag depends on the shape and speed of the object with slower objects experiencing less drag than faster objects and more aerodynamic objects experiencing less drag than those with a large leading surface area.


3

Which of the following is the formula for torque?

61% Answer Correctly

τ = rF

τ = r/F

τ = F/r2

τ = F/r


Solution

Torque measures force applied during rotation: τ = rF.  Torque (τ, the Greek letter tau) = the radius of the lever arm (r) multiplied by the force (F) applied. Radius is measured from the center of rotation or fulcrum to the point at which the perpendicular force is being applied. The resulting unit for torque is newton-meter (N-m) or foot-pound (ft-lb).


4

Hydraulics is the transmission of force through the use of which of the following?

73% Answer Correctly

air pressure

torque

liquids

gear systems


Solution

Hydraulics is the transmission of force through the use of liquids. Liquids are especially suited for transferring force in complex machines because they compress very little and can occupy very small spaces. Hydraulic pressure is calculated by dividing force by the area over which it is applied: P = F/A where F is force in pounds, A is area in square inches, and the resulting pressure is in pounds per square inch (psi).


5

A fixed pulley has a mechanical advantage of:

68% Answer Correctly

2

0

1

-1


Solution

A fixed pulley is used to change the direction of a force and does not multiply the force applied. As such, it has a mechanical advantage of one. The benefit of a fixed pulley is that it can allow the force to be applied at a more convenient angle, for example, pulling downward or horizontally to lift an object instead of upward.