| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.47 |
| Score | 0% | 69% |
The force amplification achieved by using a tool, mechanical device or machine system is called:
power |
|
mechanical advantage |
|
efficiency |
|
work |
Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. Such a device utilizes input force and trades off forces against movement to amplify and/or change its direction.
Friction between two or more solid objects that are not moving relative to each other is called:
dynamic friction |
|
gravitational friction |
|
static friction |
|
kinetic friction |
Static friction is friction between two or more solid objects that are not moving relative to each other. An example is the friction that prevents a box on a sloped surface from sliding farther down the surface.
| 0 ft. | |
| 5.25 ft. | |
| 240 ft. | |
| 10.5 ft. |
fAdA = fBdB
For this problem, the equation becomes:
35 lbs. x 6 ft. = 40 lbs. x dB
dB = \( \frac{35 \times 6 ft⋅lb}{40 lbs.} \) = \( \frac{210 ft⋅lb}{40 lbs.} \) = 5.25 ft.
| 65 ft⋅lb | |
| 21 ft⋅lb | |
| 31 ft⋅lb | |
| 130 ft⋅lb |
What type of load doesn't create specific stress points or vary with time?
non-uniformly distributed load |
|
concentrated load |
|
impact load |
|
static uniformly distributed load |
A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.