Power is the rate at which work is done, P = w/t, or work per unit time. The watt (W) is the unit for power and is equal to 1 joule (or newton-meter) per second. Horsepower (hp) is another familiar unit of power used primarily for rating internal combustion engines. 1 hp equals 746 watts.

Because this lever is in equilibrium, we know that the effort force at the blue arrow is equal to the resistance weight of the green box. For a lever that's in equilibrium, one method of calculating mechanical advantage (MA) is to divide the length of the effort arm (E_a) by the length of the resistance arm (R_a):

MA = \( \frac{E_a}{R_a} \) = \( \frac{2 ft.}{2 ft.} \) = 1

When a lever is in equilibrium, the torque from the effort and the resistance are equal. The equation for equilibrium is R_ad_a = R_bd_b where a and b are the two points at which effort/resistance is being applied to the lever.

In this problem, R_a and R_b are such that the lever is in equilibrium meaning that some multiple of the weight of the green box is being applied at the blue arrow. For a lever, this multiple is a function of the ratio of the distances of the box and the arrow from the fulcrum. That's why, for a lever in equilibrium, only the distances from the fulcrum are necessary to calculate mechanical advantage.

If the lever were not in equilibrium, you would first have to calculate the forces and distances necessary to put it in equilibrium and then divide E_a by R_a to get the mechanical advantage.

A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.

A gear train is two or more gears linked together. Gear trains are designed to increase or reduce the speed or torque outpout of a rotating system or change the direction of its output. The first gear in the chain is called the driver and the last gear in the chain the driven gear with the gears between them called idler gears.

As an object falls, its potential energy is converted into kinetic energy. The principle of conservation of mechanical energy states that, as long as no other forces are applied, total mechanical energy (PE + KE) of the object will remain constant at all points in its descent.