To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

R_ad_a = R_bd_b

Solving for d_b, our missing value, and plugging in our variables yields:

d_b = \( \frac{R_ad_a}{R_b} \) = \( \frac{70 lbs. \times 3 ft.}{75 lbs.} \) = \( \frac{210 ft⋅lb}{75 lbs.} \) = 2.8 ft.

Torque measures force applied during rotation: τ = rF.  Torque (τ, the Greek letter tau) = the radius of the lever arm (r) multiplied by the force (F) applied. Radius is measured from the center of rotation or fulcrum to the point at which the perpendicular force is being applied. The resulting unit for torque is newton-meter (N-m) or foot-pound (ft-lb).

Collinear forces act along the same line of action, concurrent forces pass through a common point and coplanar forces act in a common plane.

The mechanical advantage (MA) of a block and tackle pulley is equal to the number of times the effort force changes direction. An easy way to count how many times the effort force changes direction is to count the number of ropes that support the resistance which, in this problem, is 10. With a MA of 10, a 175 lbs. effort force could lift 175 lbs. x 10 = 1750 lbs. resistance.

Connected gears of different numbers of teeth are used together to change the rotational speed and torque of the input force. If the smaller gear drives the larger gear, the speed of rotation will be reduced and the torque will increase. If the larger gear drives the smaller gear, the speed of rotation will increase and the torque will be reduced.