A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. Such a device utilizes input force and trades off forces against movement to amplify and/or change its direction.

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.

The mechanical advantage of a wheel and axle lies in the difference in radius between the inner (axle) wheel and the outer wheel. But, this mechanical advantage is only realized when the input effort and load are applied to different wheels. Applying both input effort and load to the same wheel results in a mechanical advantage of 1.

Collinear forces act along the same line of action, concurrent forces pass through a common point and coplanar forces act in a common plane.