A screw is an inclined plane wrapped in ridges (threads) around a cylinder. The distance between these ridges defines the pitch of the screw and this distance is how far the screw advances when it is turned once. The mechanical advantage of a screw is its circumference divided by the pitch.

Tension is a force that stretches or elongates something. When a cable or rope is used to pull an object, for example, it stretches internally as it accepts the weight that it's moving. Although tension is often treated as applying equally to all parts of a material, it's greater at the places where the material is under the most stress.

To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

R_ad_a = R_bd_b

Solving for d_b, our missing value, and plugging in our variables yields:

d_b = \( \frac{R_ad_a}{R_b} \) = \( \frac{70 lbs. \times 7 ft.}{75 lbs.} \) = \( \frac{490 ft⋅lb}{75 lbs.} \) = 6.53 ft.

The mechanical advantage of a wheel and axle is the input radius divided by the output radius:

MA = \( \frac{r_i}{r_o} \)

In this case, the input radius (where the effort force is being applied) is 10 and the output radius (where the resistance is being applied) is 7 for a mechanical advantage of \( \frac{10}{7} \) = 1.43

MA = \( \frac{load}{effort} \) so effort = \( \frac{load}{MA} \) = \( \frac{60 lbs.}{1.43} \) = 41.96 lbs.

The mechanical advantage (amount of change in speed or torque) of connected gears is proportional to the number of teeth each gear has. Called gear ratio, it's the ratio of the number of teeth on the larger gear to the number of teeth on the smaller gear.  For example, a gear with 12 teeth connected to a gear with 9 teeth would have a gear ratio of 4:3.