The mechanical advantage of a gear train is its gear ratio. The gear ratio (V_r) is the product of the gear ratios between the pairs of meshed gears. Let N represent the number of teeth for each gear:

V_r = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) \( \frac{N_3}{N_4} \) ... \( \frac{N_n}{N_{n+1}} \)

In this problem, we have three gears so the equation becomes:

V_r = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) = \( \frac{22}{20} \) \( \frac{20}{8} \) = \( \frac{22}{8} \) = 2.8

Power is the rate at which work is done, P = w/t, or work per unit time. The watt (W) is the unit for power and is equal to 1 joule (or newton-meter) per second. Horsepower (hp) is another familiar unit of power used primarily for rating internal combustion engines. 1 hp equals 746 watts.

Kinetic energy is the energy of movement and is a function of the mass of an object and its speed: \(KE = {1 \over 2}mv^2\) where m is mass in kilograms, v is speed in meters per second, and KE is in joules. The most impactful quantity to kinetic energy is velocity as an increase in mass increases KE linearly while an increase in speed increases KE exponentially.

The six basic bridge forms are beam, truss, arch, cantilever, cable, and suspension.

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.