The gear ratio (V_r) of a gear train is the product of the gear ratios between the pairs of meshed gears. Let N represent the number of teeth for each gear:

V_r = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) \( \frac{N_3}{N_4} \) ... \( \frac{N_n}{N_{n+1}} \)

V_r = \( \frac{N_1}{N_2} \) = \( \frac{20}{8} \) = 2.5

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

Newton's Second Law of Motion states that "The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object." This Law describes the linear relationship between mass and acceleration when it comes to force and leads to the formula F = ma or force equals mass multiplied by rate of acceleration.

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

The six types of simple machines are the lever, wheel and axle, pulley, inclined plane, wedge, and screw.