A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.

Coefficient of friction (μ) represents how much two materials resist sliding across each other.  Smooth surfaces like ice have low coefficients of friction while rough surfaces like concrete have high μ.

Drag is friction that opposes movement through a fluid like liquid or air. The amount of drag depends on the shape and speed of the object with slower objects experiencing less drag than faster objects and more aerodynamic objects experiencing less drag than those with a large leading surface area.

Dead load is the weight of the building and materials, live load is additional weight due to occupancy or use, snow load is the weight of accumulated snow on a structure and wind load is the force of wind pressures against structure surfaces.

The mechanical advantage of a wheel and axle lies in the difference in radius between the inner (axle) wheel and the outer wheel. But, this mechanical advantage is only realized when the input effort and load are applied to different wheels. Applying both input effort and load to the same wheel results in a mechanical advantage of 1.