ASVAB Mechanical Comprehension Practice Test 862590 Results

Your Results Global Average
Questions 5 5
Correct 0 2.75
Score 0% 55%

Review

1

Which of these will have the most impact on the kinetic energy of an object?

54% Answer Correctly

its direction

its weight

its speed

its mass


Solution

Kinetic energy is the energy of movement and is a function of the mass of an object and its speed: \(KE = {1 \over 2}mv^2\) where m is mass in kilograms, v is speed in meters per second, and KE is in joules. The most impactful quantity to kinetic energy is velocity as an increase in mass increases KE linearly while an increase in speed increases KE exponentially.


2

For any given surface, the coefficient of static friction is ___________ the coefficient of kinetic friction.

54% Answer Correctly

equal to

lower than

higher than

opposite


Solution

For any given surface, the coefficient of static friction is higher than the coefficient of kinetic friction. More force is required to initally get an object moving than is required to keep it moving. Additionally, static friction only arises in response to an attempt to move an object (overcome the normal force between it and the surface).


3 If a 25 lbs. weight is placed 1 ft. from the fulcrum at the blue arrow and the green box is 4 ft. from the fulcrum, how much would the green box have to weigh to balance the lever?
61% Answer Correctly
1.56 lbs.
0 lbs.
6.25 lbs.
2.08 lbs.

Solution

To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:

Rada = Rbdb

where a represents the left side of the fulcrum and b the right, R is resistance (weight) and d is the distance from the fulcrum.

Solving for Ra, our missing value, and plugging in our variables yields:

Ra = \( \frac{R_bd_b}{d_a} \) = \( \frac{25 lbs. \times 1 ft.}{4 ft.} \) = \( \frac{25 ft⋅lb}{4 ft.} \) = 6.25 lbs.


4

The measure of how much of the power put into a machine is turned into movement or force is called:

56% Answer Correctly

force multiplication

mechanical advantage

power

efficiency


Solution

The efficiency of a machine describes how much of the power put into the machine is turned into movement or force. A 100% efficient machine would turn all of the input power into output movement or force. However, no machine is 100% efficient due to friction, heat, wear and other imperfections that consume input power without delivering any output.


5

Which of the following is not true of a  first-class lever?

51% Answer Correctly

decreases distance

increases distance

increases force

changes the direction of force


Solution

A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.