Friction resists movement. Kinetic (also called sliding or dynamic) friction resists movement in a direction opposite to the movement. Because it opposes movement, kinetic friction will eventually bring an object to a stop. An example is a rock that's sliding across ice.

A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.

The gear ratio (V_r) of a gear train is the product of the gear ratios between the pairs of meshed gears. Let N represent the number of teeth for each gear:

V_r = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) \( \frac{N_3}{N_4} \) ... \( \frac{N_n}{N_{n+1}} \)

V_r = \( \frac{N_1}{N_2} \) = \( \frac{36}{8} \) = 4.5

The efficiency of a machine describes how much of the power put into the machine is turned into movement or force. A 100% efficient machine would turn all of the input power into output movement or force. However, no machine is 100% efficient due to friction, heat, wear and other imperfections that consume input power without delivering any output.

If you apply the resistance to the axle and the effort to the wheel, the wheel and axle will multiply force and if you apply the resistance to the wheel and the effort to the axle, it will multiply speed.