Kinetic energy is the energy of movement and is a function of the mass of an object and its speed: \(KE = {1 \over 2}mv^2\) where m is mass in kilograms, v is speed in meters per second, and KE is in joules. The most impactful quantity to kinetic energy is velocity as an increase in mass increases KE linearly while an increase in speed increases KE exponentially.

Mass is an intrinsic property of matter and does not vary. Weight is the force exerted on the mass of an object due to gravity and a specific case of Newton's Second Law of Motion. Replace force with weight and acceleration with acceleration due to gravity on Earth (g) and the result is the formula for weight: W = mg or, substituting for g, weight equals mass multiplied by 9.8 m/s².

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

Pascal's law states that a pressure change occurring anywhere in a confined incompressible fluid is transmitted throughout the fluid such that the same change occurs everywhere. For a hydraulic system, this means that a pressure applied to the input of the system will increase the pressure everywhere in the system.

Because this lever is in equilibrium, we know that the effort force at the blue arrow is equal to the resistance weight of the green box. For a lever that's in equilibrium, one method of calculating mechanical advantage (MA) is to divide the length of the effort arm (E_a) by the length of the resistance arm (R_a):

MA = \( \frac{E_a}{R_a} \) = \( \frac{2 ft.}{2 ft.} \) = 1

When a lever is in equilibrium, the torque from the effort and the resistance are equal. The equation for equilibrium is R_ad_a = R_bd_b where a and b are the two points at which effort/resistance is being applied to the lever.

In this problem, R_a and R_b are such that the lever is in equilibrium meaning that some multiple of the weight of the green box is being applied at the blue arrow. For a lever, this multiple is a function of the ratio of the distances of the box and the arrow from the fulcrum. That's why, for a lever in equilibrium, only the distances from the fulcrum are necessary to calculate mechanical advantage.

If the lever were not in equilibrium, you would first have to calculate the forces and distances necessary to put it in equilibrium and then divide E_a by R_a to get the mechanical advantage.