Hydraulics is the transmission of force through the use of liquids. Liquids are especially suited for transferring force in complex machines because they compress very little and can occupy very small spaces. Hydraulic pressure is calculated by dividing force by the area over which it is applied: P = F/A where F is force in pounds, A is area in square inches, and the resulting pressure is in pounds per square inch (psi).

Collinear forces act along the same line of action, concurrent forces pass through a common point and coplanar forces act in a common plane.

A third class lever is designed to multiply distance and speed at the expense of effort force. Because the effort force is greater than the resistance, the mechanical advantage of a third class lever is always less than one.

An example of a third class lever is a broom. The fulcrum is at your hand on the end of the broom, the effort force is your other hand in the middle, and the resistance is at the bottom bristles. The effort force of your hand in the middle multiplies the distance and speed of the bristles at the bottom but at the expense of producing a brushing force that's less than the force you're applying with your hand.

Work is accomplished when force is applied to an object: W = Fd where F is force in newtons (N) and d is distance in meters (m). Thus, the more force that must be applied to move an object, the more work is done and the farther an object is moved by exerting force, the more work is done.

A fixed pulley is used to change the direction of a force and does not multiply the force applied. As such, it has a mechanical advantage of one. The benefit of a fixed pulley is that it can allow the force to be applied at a more convenient angle, for example, pulling downward or horizontally to lift an object instead of upward.