| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.18 |
| Score | 0% | 64% |
| 0.08 ft. | |
| 0.02 ft. | |
| 0.33 ft. | |
| 0 ft. |
To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:
Rada = Rbdb
where a represents the left side of the fulcrum and b the right, R is resistance (weight) and d is the distance from the fulcrum.Solving for db, our missing value, and plugging in our variables yields:
db = \( \frac{R_ad_a}{R_b} \) = \( \frac{5 lbs. \times 1 ft.}{60 lbs.} \) = \( \frac{5 ft⋅lb}{60 lbs.} \) = 0.08 ft.
Friction resists movement in a direction __________ to the movement.
opposite |
|
parallel |
|
perpendicular |
|
normal |
Friction resists movement. Kinetic (also called sliding or dynamic) friction resists movement in a direction opposite to the movement. Because it opposes movement, kinetic friction will eventually bring an object to a stop. An example is a rock that's sliding across ice.
Two or more pulleys used together are called:
wheel and axle |
|
block and tackle |
|
third-class lever |
|
gears |
Two or more pulleys used together constitute a block and tackle which, unlike a fixed pulley, does impart mechanical advantage as a function of the number of pulleys that make up the arrangement. So, for example, a block and tackle with three pulleys would have a mechanical advantage of three.
Connected gears of different numbers of teeth are used together to change which of the following charasteristics of the input force?
force |
|
torque |
|
energy |
|
rotational direction |
Connected gears of different numbers of teeth are used together to change the rotational speed and torque of the input force. If the smaller gear drives the larger gear, the speed of rotation will be reduced and the torque will increase. If the larger gear drives the smaller gear, the speed of rotation will increase and the torque will be reduced.
The mechanical advantage of a third class lever is always:
not equal to one |
|
less than one |
|
equal to one |
|
greater than one |
A third class lever is designed to multiply distance and speed at the expense of effort force. Because the effort force is greater than the resistance, the mechanical advantage of a third class lever is always less than one.
An example of a third class lever is a broom. The fulcrum is at your hand on the end of the broom, the effort force is your other hand in the middle, and the resistance is at the bottom bristles. The effort force of your hand in the middle multiplies the distance and speed of the bristles at the bottom but at the expense of producing a brushing force that's less than the force you're applying with your hand.