The mechanical advantage of a gear train is its gear ratio. The gear ratio (V_r) is the product of the gear ratios between the pairs of meshed gears. Let N represent the number of teeth for each gear:

V_r = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) \( \frac{N_3}{N_4} \) ... \( \frac{N_n}{N_{n+1}} \)

In this problem, we have three gears so the equation becomes:

V_r = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) = \( \frac{30}{12} \) \( \frac{12}{2} \) = \( \frac{30}{2} \) = 15

Gravitational potential energy is energy by virtue of gravity. The higher an object is raised above a surface the greater the distance it must fall to reach that surface and the more velocity it will build as it falls. For gravitational potential energy, PE = mgh where m is mass (kilograms), h is height (meters), and g is acceleration due to gravity which is a constant (9.8 m/s²).

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

Two or more pulleys used together constitute a block and tackle which, unlike a fixed pulley, does impart mechanical advantage as a function of the number of pulleys that make up the arrangement.  So, for example, a block and tackle with three pulleys would have a mechanical advantage of three.

According to the principle of moments, you can maintain equilibrium if the moments (forces) tending to clockwise rotation are equal to the moments tending to counterclockwise rotation. Another name for these moments of force is torque.