ASVAB Mechanical Comprehension Practice Test 940559 Results

Your Results Global Average
Questions 5 5
Correct 0 2.67
Score 0% 53%

Review

1

Which of the following represents how much two materials resist sliding across each other?

53% Answer Correctly

kinetic friction

coefficient of friction

static friction

normal friction


Solution

Coefficient of friction (μ) represents how much two materials resist sliding across each other.  Smooth surfaces like ice have low coefficients of friction while rough surfaces like concrete have high μ.


2

Which class of lever offers no mechanical advantage?

45% Answer Correctly

third

second

first

none of these, all levers offer mechanical advantage


Solution

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.


3

A truck is using a rope to pull a car. Tension in the rope is greatest in which of the following places?

49% Answer Correctly

tension is equal in all parts of the rope

near the truck

near the car

in the middle


Solution

Tension is a force that stretches or elongates something. When a cable or rope is used to pull an object, for example, it stretches internally as it accepts the weight that it's moving. Although tension is often treated as applying equally to all parts of a material, it's greater at the places where the material is under the most stress.


4

The principle of conservation of mechanical energy states that, as long as no other forces are applied, what will remain constant as an object falls?

45% Answer Correctly

acceleration

kinetic energy

total mechanical energy

potential energy


Solution

As an object falls, its potential energy is converted into kinetic energy. The principle of conservation of mechanical energy states that, as long as no other forces are applied, total mechanical energy (PE + KE) of the object will remain constant at all points in its descent.


5 If A = 2 ft. and the green box weighs 15 lbs. what is the torque acting on the A side of this lever?
74% Answer Correctly
10 ft⋅lb
90 ft⋅lb
120 ft⋅lb
30 ft⋅lb

Solution
For a lever, torque is weight x distance from the fulcrum which, in this case, is: 15 ft. x 2 lbs. = 30 ft⋅lb