A fixed pulley is used to change the direction of a force and does not multiply the force applied. As such, it has a mechanical advantage of one. The benefit of a fixed pulley is that it can allow the force to be applied at a more convenient angle, for example, pulling downward or horizontally to lift an object instead of upward.

A third class lever is designed to multiply distance and speed at the expense of effort force. Because the effort force is greater than the resistance, the mechanical advantage of a third class lever is always less than one.

An example of a third class lever is a broom. The fulcrum is at your hand on the end of the broom, the effort force is your other hand in the middle, and the resistance is at the bottom bristles. The effort force of your hand in the middle multiplies the distance and speed of the bristles at the bottom but at the expense of producing a brushing force that's less than the force you're applying with your hand.

The mechanical advantage of a wheel and axle lies in the difference in radius between the inner (axle) wheel and the outer wheel. But, this mechanical advantage is only realized when the input effort and load are applied to different wheels. Applying both input effort and load to the same wheel results in a mechanical advantage of 1.

Tension is a force that stretches or elongates something. When a cable or rope is used to pull an object, for example, it stretches internally as it accepts the weight that it's moving. Although tension is often treated as applying equally to all parts of a material, it's greater at the places where the material is under the most stress.

This problem describes a second-class lever and, for a second class lever, the effort force multiplied by the effort distance equals the resistance force multipied by the resistance distance: F_ed_e = F_rd_r. Plugging in the variables from this problem yields:

F_e x 3 ft. = 270 lbs x 0.5 ft
F_e = 135 ft-lb. / 3 ft 
F_e = 45 lbs