ASVAB Mechanical Comprehension Practice Test 960203 Results

Your Results Global Average
Questions 5 5
Correct 0 3.12
Score 0% 62%

Review

1

What defines the mechanical advantage of a first class lever?

65% Answer Correctly

position of the fulcrum

output distance

output force 

input force


Solution

A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.


2

Which of the following is not a type of bridge?

73% Answer Correctly

truss

block

cable

arch


Solution

The six basic bridge forms are beam, truss, arch, cantilever, cable, and suspension.


3 If A = 10 ft., B = 3 ft., C = 5 ft., the green box weighs 25 lbs. and the blue box weighs 35 lbs., what does the orange box have to weigh for this lever to balance?
44% Answer Correctly
29 lbs.
14.5 lbs.
116 lbs.
250 lbs.

Solution
In order for this lever to balance, the torque acting on each side of the fulrum must be equal. So, the torque produced by A must equal the torque produced by B and C. Torque is weight x distance from the fulcrum which means that the following must be true for the lever to balance:

fAdA = fBdB + fCdC

For this problem, this equation becomes:

25 lbs. x 10 ft. = 35 lbs. x 3 ft. + fC x 5 ft.

250 ft. lbs. = 105 ft. lbs. + fC x 5 ft.

fC = \( \frac{250 ft. lbs. - 105 ft. lbs.}{5 ft.} \) = \( \frac{145 ft. lbs.}{5 ft.} \) = 29 lbs.


4

Which of the following statements about drag is false?

58% Answer Correctly

drag occurs during movement through a fluid

the amount of drag depends on the speed of an object

the amount of drag depends on the shape of an object

slower objects experience more drag than faster objects


Solution

Drag is friction that opposes movement through a fluid like liquid or air. The amount of drag depends on the shape and speed of the object with slower objects experiencing less drag than faster objects and more aerodynamic objects experiencing less drag than those with a large leading surface area.


5

A wedge is most similar to what other type of simple machine?

70% Answer Correctly

first-class lever

third-class lever

second-class lever

inclined plane


Solution

The wedge is a moving inclined plane that is used to lift, hold, or break apart an object. A wedge converts force applied to its blunt end into force perpendicular to its inclined surface. In contrast to a stationary plane where force is applied to the object being moved, with a wedge the object is stationary and the force is being applied to the plane. Examples of a wedge include knives and chisels.